6000 Series Couplings RC | Fernco - US

Where to Buy Fernco Products

Clamps

Manufactured to the requirements of CSA B602
Clamp Housing- 301 Stainless Steel
Clamp Band - 301 Stainless Steel
Clamp Screw - 305 Stainless Steel
Installation torque 60" lbs

Shear Ring

.012" Thick, 300 Series Stainless Steel
Width manufactured according to coupling width (1.50", 2.13", or 4")
Length manufactured according to coupling diameter
Clamps spot welded in place

Strong, Shear Resistant AIS and BABA Compliant Couplings.
The 6000 Series Pipe Coupling, is designed to meet the stringent Build America Buy America (BABA) and American Iron and Steel (AIS) requirements mandated for Clean Water State Revolving Fund (CWSRF) projects. With AIS and BABA compliant stainless-steel components, this specification ensures compliance within the appropriate regulations while delivering exceptional performance and reliability in sanitary or storm sewer systems. Fernco RC couplings are the go-to-choice for below-ground applications where resistance to heavy earth loads and shear forces are required, while providing improved pipe alignment.

Features

AIS and BABA compliant
Strong Back RC Couplings offer a .012" stainless steel shield and a molded in bushing.
Positive seal against infiltration and exfiltration
Leak-proof and is resistant to chemicals, ultraviolet rays, fungus growth, and normal sewer gases
Connects same or different pipe sizes and materials quickly and easily

Technical Specifications

Installation torque: 60 inch lbs.
Maximum test pressure: 4.3 PSI (29.6KPA)
Maximum operating temperature: 140º F non-consistent
Minimum operating temperature: – 30° F

6000 Series Couplings

6001 Series - Clay to Clay
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6001-1010RC	10 IN	12 IN - 12.7 IN	10 IN	12 IN - 12.7 IN	13.41 IN	6 IN
6001-1010WCRC	10 IN	12 IN - 12.7 IN	10 IN	12 IN - 12.7 IN	13.375 IN	6 IN
6001-10-8RC	10 IN	12 IN - 12.7 IN	8 IN	9.3 IN - 9.9 IN	13.41 IN	6.25 IN
6001-1210RC	12 IN	13.8 IN - 14.7 IN	10 IN	12 IN - 12.7 IN	15.5 IN	6.5 IN
6001-1212RC	12 IN	13.8 IN - 14.7 IN	12 IN	13.8 IN - 14.7 IN	15.52 IN	6.5 IN
6001-1212WCRC	12 IN	14.5 IN - 15.5 IN	12 IN	14.5 IN - 15.5 IN	16.25 IN	6.5 IN
6001-1510RC	15 IN	17 IN - 18.3 IN	10 IN	12 IN - 12.7 IN	19.16 IN	10.25 IN
6001-1512RC	15 IN	17 IN - 18.3 IN	12 IN	13.8 IN - 14.7 IN	19.1 IN	7.25 IN
6001-1515RC	15 IN	17 IN - 18.3 IN	15 IN	17 IN - 18.3 IN	19.65 IN	10 IN
6001-1818RC	18 IN	20.9 IN - 22.5 IN	18 IN	20.9 IN - 22.5 IN	23.11 IN	10 IN
6001-2121RC	21 IN	23 IN - 25.3 IN	21 IN	23 IN - 25.3 IN	26.91 IN	10 IN
6001-2424RC	24 IN	27.5 IN - 29.8 IN	24 IN	27.5 IN - 29.8 IN	30.48 IN	10 IN
6001-2727RC	27 IN	30.9 IN - 33.2 IN	27 IN	30.9 IN - 33.2 IN	33.91 IN	10 IN
6001-44RC	4 IN	4.9 IN - 5.6 IN	4 IN	4.9 IN - 5.6 IN	5.95 IN	4 IN
6001-44WCRC	4 IN	5.2 IN - 5.9 IN	4 IN	5.2 IN - 5.9 IN	6.15 IN	4 IN
6001-55RC	5 IN	5.7 IN - 6.4 IN	5 IN	5.7 IN - 6.4 IN	7.08 IN	6 IN
6001-64RC	6 IN	7 IN - 7.6 IN	6 IN	4.9 IN - 5.6 IN	8.31 IN	6 IN
6001-64WCRC	6 IN	7.5 IN - 8.3 IN	4 IN	4.9 IN - 5.6 IN	8.78 IN	6.25 IN
6001-64WCRC	6 IN	7.5 IN - 8.3 IN	4 IN	4.9 IN - 5.6 IN	8.78 IN	6.25 IN
6001-66RC	6 IN	7 IN - 7.6 IN	6 IN	7 IN - 7.6 IN	8.15 IN	6 IN
6001-66WCRC	6 IN	7.5 IN - 8.3 IN	6 IN	7.5 IN - 8.3 IN	8.78 IN	6 IN
6001-84RC	8 IN	9.3 IN - 9.9 IN	4 IN	4.9 IN - 5.6 IN	10.4 IN	6.25 IN
6001-86RC	8 IN	9.3 IN - 9.9 IN	6 IN	7 IN - 7.6 IN	10.4 IN	6 IN
6001-86WCRC	8 IN	9.6 IN - 10.2 IN	6 IN	7.7 IN - 7.9 IN	10.77 IN	6.25 IN
6001-88RC	8 IN	9.3 IN - 9.9 IN	8 IN	9.3 IN - 9.9 IN	10.3 IN	6 IN
6001-88WCRC	8 IN	9.6 IN - 10.2 IN	8 IN	9.6 IN - 10.2 IN	10.67 IN	6 IN

6002 Series - Clay to Cast Iron, Plastic or Steel
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6002-1010RC	10 IN	12 IN - 12.7 IN	10 IN	9.8 IN - 10.8 IN	13.44 IN	5.875 IN
6002-1010WCRC	10 IN	12 IN - 12.7 IN	10 IN	9.8 IN - 10.8 IN	13.41 IN	5.9 IN
6002-10-8RC	10 IN	12 IN - 12.7 IN	8 IN	7.9 IN - 8.7 IN	13.6 IN	5.09 IN
6002-1210RC	12 IN	13.8 IN - 14.7 IN	10 IN	9.8 IN - 10.8 IN	15.5 IN	6.37 IN
6002-1212RC	12 IN	13.8 IN - 14.7 IN	12 IN	12 IN - 12.8 IN	15.43 IN	6.4 IN
6002-1212WCRC	12 IN	14.5 IN - 15.5 IN	12 IN	11.8 IN - 12.6 IN	17.41 IN	6.3 IN
6002-1510RC	15 IN	17 IN - 18.3 IN	10 IN	9.8 IN - 10.8 IN	19.1 IN	6.87 IN
6002-1512RC	15 IN	17 IN - 18.3 IN	12 IN	12 IN - 12.8 IN	19.1 IN	6.87 IN
6002-1515RC	15 IN	17 IN - 18.3 IN	15 IN	15.5 IN - 16.5 IN	18.875 IN	7 IN
6002-1818RC	18 IN	20.9 IN - 22.5 IN	18 IN	17.5 IN - 19 IN	22.9 IN	9.63 IN
6002-2121RC	21 IN	23 IN - 25.3 IN	21 IN	20.5 IN - 22.5 IN	26.91 IN	10 IN
6002-2424RC	24 IN	27.5 IN - 29.8 IN	24 IN	23 IN - 25 IN	30.48 IN	10 IN
6002-2727RC	27 IN	30.9 IN - 33.2 IN	27 IN	26.2 IN - 28.2 IN	33.91 IN	10 IN
6002-43RC	4 IN	4.9 IN - 5.6 IN	3 IN	3.2 IN - 3.7 IN	5.875 IN	3.95 IN
6002-44RC	4 IN	4.9 IN - 5.6 IN	4 IN	4.1 IN - 4.7 IN	5.95 IN	4 IN
6002-44WCRC	4 IN	5.2 IN - 5.9 IN	4 IN	4.1 IN - 4.7 IN	6.12 IN	4 IN
6002-46RC	4 IN	4.9 IN - 5.6 IN	6 IN	6.3 IN - 6.8 IN	7.08 IN	5.75 IN
6002-54RC	5 IN	5.7 IN - 6.4 IN	4 IN	4.1 IN - 4.7 IN	6.74 IN	5.03 IN
6002-55RC	5 IN	5.7 IN - 6.4 IN	5 IN	5.1 IN - 5.8 IN	6.74 IN	5.03 IN
6002-64RC	6 IN	7 IN - 7.6 IN	4 IN	4.1 IN - 4.7 IN	8.07 IN	5.625 IN
6002-64WCRC	6 IN	7.5 IN - 8.3 IN	4 IN	4.1 IN - 4.7 IN	8.71 IN	6 IN
6002-65RC	6 IN	7 IN - 7.6 IN	5 IN	5.1 IN - 5.8 IN	8.16 IN	5.875 IN
6002-66RC	6 IN	7 IN - 7.6 IN	6 IN	6.3 IN - 6.8 IN	8.1 IN	5.75 IN
6002-66WCRC	6 IN	7.5 IN - 8.3 IN	6 IN	6.8 IN - 7.1 IN	8.71 IN	6 IN
6002-84RC	8 IN	9.3 IN - 9.9 IN	4 IN	4.1 IN - 4.7 IN	10.09 IN	5.93 IN

6003 Series - Clay to Ductile Iron
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6003-1010RC	10 IN	12 IN - 12.7 IN	10 IN	11 IN - 11.3 IN	13.6 IN	5.9 IN
6003-1010WCRC	10 IN	12 IN - 12.7 IN	10 IN	11 IN - 11.3 IN	13.41 IN	5.9 IN
6003-10-8RC	10 IN	12 IN - 12.7 IN	8 IN	8.6 IN - 9.2 IN	13.41 IN	5.9 IN
6003-1210RC	12 IN	13.8 IN - 14.7 IN	10 IN	11 IN - 11.3 IN	16.1 IN	5.8 IN
6003-1212RC	12 IN	13.8 IN - 14.7 IN	12 IN	12.6 IN - 13.3 IN	16.25 IN	6.42 IN
6003-1212WCRC	12 IN	14.5 IN - 15.5 IN	12 IN	12.6 IN - 13.3 IN	IN	IN
6003-1510RC	15 IN	17 IN - 18.3 IN	10 IN	11 IN - 11.3 IN	19.1 IN	6.87 IN
6003-1512RC	15 IN	17 IN - 18.3 IN	12 IN	12.6 IN - 13.3 IN	19.16 IN	9.86 IN
6003-1515RC	15 IN	17 IN - 18.3 IN	15 IN	15.4 IN - 16.6 IN	19.12 IN	10 IN
6003-1516RC	15 IN	17 IN - 18.3 IN	16 IN	16.5 IN - 18 IN	23.11 IN	10 IN
6003-1818RC	18 IN	20.9 IN - 22.5 IN	18 IN	19.4 IN - 19.6 IN	30.48 IN	10 IN
6003-2424RC	24 IN	27.5 IN - 29.8 IN	24 IN	24.3 IN - 26.3 IN	30.48 IN	10 IN
6003-44RC	4 IN	4.9 IN - 5.6 IN	4 IN	4.5 IN - 4.9 IN	6.15 IN	3.97 IN
6003-44WCRC	4 IN	5.2 IN - 5.9 IN	4 IN	4.5 IN - 4.9 IN	IN	IN
6003-46RC	4 IN	4.9 IN - 5.6 IN	6 IN	6.4 IN - 7.1 IN	6.68 IN	4.91 IN
6003-54RC	5 IN	5.7 IN - 6.4 IN	4 IN	4.5 IN - 4.9 IN	6.68 IN	4.91 IN
6003-55RC	5 IN	5.7 IN - 6.4 IN	5 IN	5.4 IN - 6.1 IN	8.14 IN	5.92 IN
6003-64RC	6 IN	7 IN - 7.6 IN	4 IN	4.5 IN - 4.9 IN	8.78 IN	5.88 IN
6003-64WCRC	6 IN	7 IN - 7.6 IN	4 IN	4.5 IN - 4.9 IN	8.14 IN	5.92 IN
6003-65RC	6 IN	7 IN - 7.6 IN	5 IN	5.4 IN - 6.1 IN	8.14 IN	5.92 IN
6003-66RC	6 IN	7 IN - 7.6 IN	6 IN	6.4 IN - 7.1 IN	8.78 IN	5.88 IN
6003-66WCRC	6 IN	7.5 IN - 8.3 IN	6 IN	6.4 IN - 7.1 IN	10.48 IN	5.74 IN
6003-84RC	8 IN	9.3 IN - 9.9 IN	4 IN	4.5 IN - 4.9 IN	10.24 IN	5.99 IN
6003-86RC	8 IN	9.3 IN - 9.9 IN	6 IN	6.4 IN - 7.1 IN	10.77 IN	5.88 IN
6003-86WCRC	8 IN	9.6 IN - 10.2 IN	6 IN	6.4 IN - 7.1 IN	10.24 IN	5.99 IN
6003-88RC	8 IN	9.3 IN - 9.9 IN	8 IN	8.6 IN - 9.2 IN	10.77 IN	5.88 IN
6003-88WCRC	8 IN	9.6 IN - 10.2 IN	8 IN	8.6 IN - 9.2 IN	10.77 IN	5.88 IN

6004 Series - Concrete to Concrete
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6004-1010RC	10 IN	12 IN - 12.7 IN	10 IN	12 IN - 12.7 IN	13.375 IN	5.875 IN
6004-1010LCRC	10 IN	13 IN - 14.5 IN	10 IN	13 IN - 14.5 IN	IN	IN
6004-1210RC	12 IN	14.5 IN - 15.5 IN	10 IN	12 IN - 12.7 IN	16.25 IN	6.42 IN
6004-1212RC	12 IN	14.5 IN - 15.5 IN	12 IN	14.5 IN - 15.5 IN	16.25 IN	6.4 IN
6004-1212LCRC	12 IN	15.1 IN - 16 IN	12 IN	15.1 IN - 16 IN	IN	IN
6004-1515RC	15 IN	18.9 IN - 20.2 IN	15 IN	18.9 IN - 20.2 IN	20.72 IN	8.89 IN
6004-1818RC	18 IN	21 IN - 22.5 IN	18 IN	21 IN - 22.5 IN	24.01 IN	10 IN
6004-2121RC	21 IN	25.1 IN - 26.6 IN	21 IN	25.1 IN - 26.6 IN	28.21 IN	10 IN
6004-2424RC	24 IN	29 IN - 30.5 IN	24 IN	29 IN - 30.5 IN	31.52 IN	10 IN
6004-2727RC	27 IN	32 IN - 33.9 IN	27 IN	32 IN - 33.9 IN	35.02 IN	9.89 IN
6004-44RC	4 IN	5.2 IN - 5.9 IN	4 IN	5.2 IN - 5.9 IN	6.2 IN	4 IN
6004-64RC	6 IN	7.3 IN - 7.9 IN	4 IN	5.2 IN - 5.9 IN	8.3 IN	5.93 IN
6004-66RC	6 IN	7.3 IN - 7.9 IN	6 IN	7.3 IN - 7.9 IN	8.375 IN	5.9 IN
6004-86RC	8 IN	9.9 IN - 10.5 IN	6 IN	7.3 IN - 7.9 IN	10.95 IN	6.15 IN
6004-88RC	8 IN	9.9 IN - 10.5 IN	8 IN	9.9 IN - 10.5 IN	11.35 IN	5.9 IN

6005 Series - Concrete to Clay
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6005-1010RC	10 IN	12 IN - 12.7 IN	10 IN	12 IN - 12.7 IN	13.41 IN	5.9 IN
6005-1210RC	12 IN	14.5 IN - 15.5 IN	10 IN	12 IN - 12.7 IN	16.25 IN	6.42 IN
6005-1212RC	12 IN	14.5 IN - 15.5 IN	12 IN	13.8 IN - 14.7 IN	16.25 IN	6.42 IN
6005-1515RC	15 IN	18.9 IN - 20.2 IN	15 IN	17 IN - 18.3 IN	20.72 IN	8.89 IN
6005-44RC	4 IN	5.2 IN - 5.9 IN	4 IN	4.9 IN - 5.6 IN	6.15 IN	3.97 IN
6005-64RC/td>	6 IN	7.3 IN - 7.9 IN	6 IN	4.9 IN - 5.6 IN	8.3 IN	5.93 IN
6005-66RC	6 IN	7.3 IN - 7.9 IN	6 IN	7 IN - 7.6 IN	8.3 IN	5.93 IN
6005-86RC	8 IN	9.9 IN - 10.5 IN	6 IN	7 IN - 7.6 IN	11.38 IN	5.9 IN
6005-88RC	8 IN	9.9 IN - 10.5 IN	8 IN	9.3 IN - 9.9 IN	11.38 IN	5.9 IN

6006 Series - Concrete to Cast Iron, Plastic or Steel
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6006-1010RC	10 IN	12 IN - 12.7 IN	10 IN	9.8 IN - 10.8 IN	13.625 IN	6.34 IN
6006-1010LCRC	10 IN	13.53 IN - 14.5 IN	10 IN	9.8 IN - 10.8 IN	IN	IN
6006-10-8RC	10 IN	12 IN - 12.7 IN	8 IN	7.9 IN - 8.7 IN	13.41 IN	5.9 IN
6006-1210RC	12 IN	14.5 IN - 15.5 IN	10 IN	9.8 IN - 10.8 IN	17.41 IN	6.3 IN
6006-1210LCRC	12 IN	15.1 IN - 16 IN	10 IN	9.8 IN - 10.8 IN	IN	IN
6006-1212RC	12 IN	14.5 IN - 15.5 IN	12 IN	12 IN - 12.8 IN	17.47 IN	6.34 IN
6006-1212LCRC	12 IN	15.1 IN - 16 IN	12 IN	12 IN - 12.8 IN	IN	IN
6006-1510RC	15 IN	18.9 IN - 20.2 IN	10 IN	9.8 IN - 10.8 IN	17.41 IN	6.3 IN
6006-1512RC	15 IN	18.9 IN - 20.2 IN	12 IN	12 IN - 12.8 IN	20.64 IN	9.68 IN
6006-1515RC	15 IN	18.9 IN - 20.2 IN	15 IN	15.5 IN - 16.5 IN	20.64 IN	9.68 IN
6006-1818RC	18 IN	21 IN - 22.5 IN	18 IN	17.5 IN - 19 IN	23.55 IN	10 IN
6006-2121RC	21 IN	25.1 IN - 26.6 IN	21 IN	20.5 IN - 22.5 IN	28.21 IN	10 IN
6006-2424RC	24 IN	29 IN - 30.5 IN	24 IN	23 IN - 25 IN	31.52 IN	10 IN
6006-2727RC	27 IN	32 IN - 33.9 IN	27 IN	26.2 IN - 28.2 IN	35.02 IN	9.89 IN
6006-44RC	4 IN	5.2 IN - 5.9 IN	4 IN	4.1 IN - 4.7 IN	6.32 IN	3.95 IN
6006-44LCRC	4 IN	5.6 IN - 6.1 IN	4 IN	4.1 IN - 4.7 IN	IN	IN
6006-54RC	5 IN	5.3 IN - 5.9 IN	4 IN	4.1 IN - 4.7 IN	6.45 IN	3.95 IN
6006-64RC	6 IN	7.3 IN - 7.9 IN	4 IN	4.1 IN - 4.7 IN	8.52 IN	5.95 IN
6006-65RC	6 IN	7.3 IN - 7.9 IN	5 IN	5.1 IN - 5.8 IN	8.49 IN	5.81 IN
6006-66RC	6 IN	7.3 IN - 7.9 IN	6 IN	6.3 IN - 6.8 IN	8.41 IN	5.84 IN
6006-84RC	8 IN	9.9 IN - 10.5 IN	4 IN	4.1 IN - 4.7 IN	11.38 IN	5.9 IN
6006-86RC	8 IN	9.9 IN - 10.5 IN	6 IN	6.3 IN - 6.8 IN	10.95 IN	6.15 IN
6006-88RC	8 IN	9.9 IN - 10.5 IN	8 IN	7.9 IN - 8.7 IN	11.38 IN	5.9 IN
6006-88LCRC	8 IN	11.9 IN - 12.8 IN	8 IN	7.9 IN - 8.7 IN	13.45 IN	6.37 IN

6051 Series - Ductile Iron to Cast Iron, Plastic or Steel
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6051-1010RC	10 IN	11 IN - 11.3 IN	10 IN	9.8 IN - 10.8 IN	11.685 IN	6 IN
6051-10-8RC	10 IN	11 IN - 11.3 IN	8 IN	7.9 IN - 8.7 IN	11.685 IN	6.25 IN
6051-1210RC	12 IN	12.6 IN - 13.3 IN	10 IN	9.8 IN - 10.8 IN	13.75 IN	6.5 IN
6051-1212RC	12 IN	12.6 IN - 13.3 IN	12 IN	12 IN - 12.8 IN	13.75 IN	6.25 IN
6051-1215RC	12 IN	12.6 IN - 13.3 IN	15 IN	15.5 IN - 16.5 IN	16.5 IN	9.87 IN
6051-1510RC	15 IN	15.4 IN - 16.6 IN	10 IN	9.8 IN - 10.8 IN	IN	IN
6051-1512RC	15 IN	15.4 IN - 16.6 IN	12 IN	12 IN - 12.8 IN	16.92 IN	9.89 IN
6051-1515RC	15 IN	15.4 IN - 16.6 IN	15 IN	15.5 IN - 16.5 IN	16.92 IN	9.89 IN
6051-1818RC	18 IN	19.4 IN - 19.6 IN	18 IN	17.5 IN - 19 IN	21.01 IN	10 IN
6051-2424RC	24 IN	24.3 IN - 26.3 IN	24 IN	23 IN - 25 IN	IN	IN
6051-44RC	4 IN	4.5 IN - 4.9 IN	4 IN	4.1 IN - 4.7 IN	5.5 IN	4 IN
6051-45RC	4 IN	4.5 IN - 4.9 IN	5 IN	5.1 IN - 5.8 IN	6.16 IN	3.97 IN
6051-46RC	4 IN	4.5 IN - 4.9 IN	6 IN	6.3 IN - 6.8 IN	7.38 IN	5.74 IN
6051-54RC	5 IN	5.4 IN - 6.1 IN	4 IN	4.1 IN - 4.7 IN	6.4 IN	3.95 IN
6051-55RC	5 IN	5.4 IN - 6.1 IN	5 IN	5.1 IN - 5.8 IN	6.74 IN	5.03 IN
6051-64RC	6 IN	6.4 IN - 7.1 IN	4 IN	4.1 IN - 4.7 IN	7.68 IN	5.95 IN
6051-65RC	6 IN	6.4 IN - 7.1 IN	5 IN	5.1 IN - 5.8 IN	7.66 IN	5.82 IN
6051-66RC	6 IN	6.4 IN - 7.1 IN	6 IN	6.3 IN - 6.8 IN	7.56 IN	5.8 IN
6051-84RC	8 IN	8.6 IN - 9.2 IN	4 IN	4.1 IN - 4.7 IN	9.82 IN	5.98 IN
6051-86RC	8 IN	8.6 IN - 9.2 IN	6 IN	6.3 IN - 6.8 IN	9.78 IN	6.25 IN
6051-88RC	8 IN	8.6 IN - 9.2 IN	8 IN	7.9 IN - 8.7 IN	9.78 IN	6 IN

6055 Series - Ductile Iron to Ductile Iron
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6055-1010RC	10 IN	10.3 IN - 11 IN	10 IN	10.3 IN - 11 IN	11.61 IN	6 IN
6055-10-8RC	10 IN	10.3 IN - 11 IN	8 IN	8.6 IN - 9.2 IN	11.61 IN	5.97 IN
6055-1210RC	12 IN	12.6 IN - 13.3 IN	10 IN	10.3 IN - 11 IN	13.75 IN	6.5 IN
6055-1212RC	12 IN	12.6 IN - 13.3 IN	12 IN	12.6 IN - 13.3 IN	13.95 IN	6 IN
6055-12-8RC	12 IN	12.6 IN - 13.3 IN	8 IN	8.6 IN - 9.2 IN	IN	6.5 IN
6055-1510RC	15 IN	15.4 IN - 16.6 IN	10 IN	10.3 IN - 11 IN	IN	IN
6055-1512RC	15 IN	15.4 IN - 16.6 IN	12 IN	12.6 IN - 13.3 IN	IN	IN
6055-1515RC	15 IN	15.4 IN - 16.6 IN	15 IN	15.4 IN - 16.6 IN	18.31 IN	10 IN
6055-1818RC	19 IN	19.4 IN - 19.6 IN	18 IN	19.4 IN - 19.6 IN	21.01 IN	10 IN
6055-2424RC	24 IN	24.3 IN - 26.3 IN	24 IN	24.3 IN - 26.3 IN	IN	IN
6055-44RC	4 IN	4.5 IN - 4.9 IN	4 IN	4.5 IN - 4.9 IN	5.46 IN	3.95 IN
6055-54RC	5 IN	5.4 IN - 6.1 IN	4 IN	4.5 IN - 4.9 IN	6.75 IN	5.25 IN
6055-55RC	5 IN	5.4 IN - 6.1 IN	5 IN	5.4 IN - 6.1 IN	6.875 IN	6 IN
6055-64RC	6 IN	6.4 IN - 7.1 IN	4 IN	4.5 IN - 4.9 IN	7.66 IN	5.55 IN
6055-65RC	6 IN	6.4 IN - 7.1 IN	5 IN	5.3 IN - 5.9 IN	7.77 IN	5.88 IN
6055-66RC	6 IN	6.4 IN - 7.1 IN	6 IN	6.4 IN - 7.1 IN	7.7 IN	5.95 IN
6055-84RC	8 IN	8.6 IN - 9.2 IN	4 IN	4.5 IN - 4.9 IN	9.82 IN	5.98 IN
6055-86RC	8 IN	8.6 IN - 9.2 IN	6 IN	6.4 IN - 7.1 IN	9.82 IN	5.98 IN
6055-88RC	8 IN	8.6 IN - 9.2 IN	8 IN	8.6 IN - 9.2 IN	9.83 IN	6 IN

6056 Series - Cast Iron, Plastic or Steel
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6056-075RC	.75 IN	0.9 IN - 1.2 IN	0.75 IN	0.9 IN - 1.2 IN	1.5 IN	2.375 IN
6056-100RC	1 IN	1.1 IN - 1.4 IN	1 IN	1.1 IN - 1.4 IN	1.75 IN	2.375 IN
6056-1010RC	10 IN	9.8 IN - 10.8 IN	10 IN	9.8 IN - 10.8 IN	11.625 IN	5.875 IN
6056-10-8RC	10 IN	9.8 IN - 10.8 IN	8 IN	7.9 IN - 8.7 IN	11 IN	5.89 IN
6056-1210RC	12 IN	12 IN - 12.8 IN	10 IN	9.8 IN - 10.8 IN	13.45 IN	6.37 IN
6056-1212RC	12 IN	12 IN - 12.8 IN	12 IN	12 IN - 12.8 IN	13.54 IN	6.32 IN
6056-125RC	1.25 IN	1.4 IN - 1.7 IN	1.25 IN	1.4 IN - 1.7 IN	2.125 IN	3.5 IN
6056-150/125RC	1.5 IN	1.8 IN - 2 IN	1.25 IN	1.4 IN - 1.7 IN	2.375 IN	3.5 IN
6056-150RC	1.5 IN	1.8 IN - 2 IN	1.5 IN	1.4 IN - 1.7 IN	2.5 IN	3.5 IN
6056-1510RC	15 IN	15.5 IN - 16.5 IN	15 IN	9.8 IN - 10.8 IN	17.41 IN	6.3 IN
6056-1512RC	15 IN	15.5 IN - 16.5 IN	15 IN	12 IN - 12.8 IN	16.5 IN	9.87 IN
6056-1515RC	15 IN	15.5 IN - 16.5 IN	15 IN	15.5 IN - 16.5 IN	16.45 IN	10 IN
6056-1818RC	18 IN	17.5 IN - 19 IN	18 IN	17.5 IN - 19 IN	19.91 IN	9.89 IN
6056-2121RC	21 IN	20.5 IN - 22.5 IN	21 IN	20.5 IN - 22.5 IN	23.8 IN	10 IN
6056-215RC	2 IN	2.2 IN - 2.5 IN	1.5 IN	1.8 IN - 2 IN	2.875 IN	3.4 IN
6056-22RC	2 IN	2.2 IN - 2.5 IN	2 IN	2.2 IN - 2.5 IN	2.875 IN	3.4 IN
6056-2424RC	24 IN	23 IN - 25 IN	24 IN	23 IN - 25 IN	27 IN	9.89 IN
6056-250RC	2.5 IN	2.5 IN - 3.1 IN	2.5 IN	2.5 IN - 3.1 IN	3.45 IN	3.5 IN
6056-250/125RC	2.5 IN	2.5 IN - 3.1 IN	1.25 IN	1.4 IN - 1.7 IN	3.45 IN	3.5 IN
6056-250/150RC	2.5 IN	2.5 IN - 3.1 IN	1.5 IN	1.8 IN - 2 IN	3.45 IN	3.5 IN
6056-250/22RC	2.5 IN	2.5 IN - 3.1 IN	2 IN	2.2 IN - 2.5 IN	3.45 IN	3.5 IN
6056-2727RC	27 IN	26.2 IN - 28.2 IN	27 IN	26.2 IN - 28.2 IN	29.81 IN	10 IN
6056-3/250RC	3 IN	3.2 IN - 3.7 IN	2.5 IN	2.5 IN - 3.1 IN	IN	IN
6056-315RC	3 IN	3.2 IN - 3.7 IN	1.5 IN	1.8 IN - 2 IN	4 IN	3.875 IN
6056-32RC	3 IN	3.2 IN - 3.7 IN	2 IN	2.2 IN - 2.5 IN	4.25 IN	4 IN
6056-33RC	3 IN	3.2 IN - 3.7 IN	3 IN	3.2 IN - 3.7 IN	4.1 IN	3.875 IN
6056-415RC	4 IN	4.1 IN - 4.5 IN	1.5 IN	1.8 IN - 2 IN	5.05 IN	3.96 IN
6056-42RC	4 IN	4.1 IN - 4.7 IN	2 IN	2.2 IN - 2.5 IN	5.05 IN	3.9 IN
6056-43RC	4 IN	4.1 IN - 4.7 IN	3 IN	3.2 IN - 3.7 IN	5.125 IN	4 IN
6056-44RC	4 IN	4.1 IN - 4.7 IN	4 IN	4.1 IN - 4.7 IN	5.125 IN	4 IN
6056-54RC	5 IN	5.1 IN - 5.8 IN	4 IN	4.1 IN - 4.7 IN	6.375 IN	4 IN
6056-55RC	5 IN	5.1 IN - 5.8 IN	5 IN	5.1 IN - 5.8 IN	6.2 IN	4 IN
6056-64RC	6 IN	6.3 IN - 6.8 IN	4 IN	4.1 IN - 4.7 IN	7.29 IN	5.73 IN
6056-65RC	6 IN	6.3 IN - 6.8 IN	5 IN	5.1 IN - 5.8 IN	7.3 IN	5.78 IN
6056-66RC	6 IN	6.3 IN - 6.8 IN	6 IN	6.3 IN - 6.8 IN	7.3 IN	5.78 IN
6056-84RC	8 IN	7.9 IN - 8.7 IN	4 IN	4.1 IN - 4.7 IN	9.27 IN	6.3 IN
6056-86RC	8 IN	7.9 IN - 8.7 IN	6 IN	6.3 IN - 6.8 IN	9.28 IN	5.875 IN
6056-88RC	8 IN	7.9 IN - 8.7 IN	8 IN	7.9 IN - 8.7 IN	13.41 IN	5.9 IN

6057 Series - Concrete to Ductile Iron
Part No.	Nominal Pipe Size (A)	OD Range (A)	Nominal Pipe Size (B)	OD Range (A)	Width	Length
6057-1010RC	10 IN	12 IN - 12.7 IN	10 IN	11 IN - 11.3 IN	13.41 IN	5.9 IN
6057-1210RC	10 IN	14.5 IN - 15.5 IN	10 IN	11 IN - 11.3 IN	17.41 IN	6.3 IN
6057-1210LCRC	12 IN	15.1 IN - 16 IN	10 IN	11 IN - 11.3 IN	IN	IN
6057-1212RC	12 IN	14.5 IN - 15.5 IN	12 IN	12.6 IN - 13.3 IN	16.25 IN	6.42 IN
6057-1212LCRC	12 IN	15.1 IN - 16 IN	12 IN	12.6 IN - 13.3 IN	IN	IN
6057-12-6RC	12 IN	14.5 IN - 15.5 IN	6 IN	6.4 IN - 7.1 IN	16.25 IN	6.42 IN
6057-12-8RC	12 IN	14.5 IN - 15.5 IN	8 IN	8.6 IN - 9.2 IN	16.25 IN	6.42 IN
6057-1510RC	15 IN	18.9 IN - 20.2 IN	10 IN	10.3 IN - 11 IN	20.64 IN	9.68 IN
6057-1512RC	15 IN	18.9 IN - 20.2 IN	12 IN	12.6 IN - 13.3 IN	20.64 IN	9.68 IN
6057-1515RC	15 IN	18.9 IN - 20.2 IN	15 IN	15.4 IN - 16.6 IN	20.72 IN	8.89 IN
6057-15-8RC	15 IN	18.9 IN - 20.2 IN	8 IN	8.6 IN - 9.2 IN	20.64 IN	9.68 IN
6057-1818RC	18 IN	21 IN - 22.5 IN	18 IN	19.4 IN - 19.6 IN	IN	IN
6057-2424RC	24 IN	29 IN - 30.5 IN	24 IN	24.3 IN - 26.3 IN	IN	IN
6057-44RC	4 IN	5.2 IN - 5.9 IN	4 IN	4.5 IN - 4.9 IN	6.15 IN	3.97 IN
6057-64RC	6 IN	7.3 IN - 7.9 IN	4 IN	4.5 IN - 4.9 IN	8.3 IN	5.93 IN
6057-66RC	6 IN	7.3 IN - 7.9 IN	6 IN	6.4 IN - 7.1 IN	8.3 IN	5.93 IN
6057-68RC	6 IN	7.3 IN - 7.9 IN	8 IN	8.6 IN - 9.2 IN	9.82 IN	5.98 IN
6057-86RC	8 IN	9.9 IN - 10.5 IN	6 IN	6.4 IN - 7.1 IN	11 IN	5.79 IN
6057-88RC	8 IN	9.9 IN - 10.5 IN	8 IN	8.6 IN - 9.2 IN	11 IN	5.79 IN