Menu
Drain pipe repair
QwikFix Pipe Repair Kit
Cut out a broken section of drain pipe and put in a new one. Each kit has a 12″ piece of Sch 40 PVC and two Fernco flexible couplings. No glue.
1-1/2″ to 4″
Plastic, cast iron or steel
DWV
Made in USA
QwikFix
All-in-one pipe repair kit
A quick, permanent fix for a broken drain pipe. Use it when a joint fails or a pipe gets damaged, like a drill or nail through a pipe in the wall.
- Two Fernco 1056 Series flexible couplings
- A 12″ piece of Sch 40 PVC pipe
- 12″ fits between studs on 16″ centers
- Tighten with a screwdriver, nut driver or drill
How it goes
For vertical or horizontal pipe, with proper strapping or support.
1
Measure and mark
1 Mark the damaged section to cut out, using the kit as a guide.
2
Cut and connect
2 Cut out the damaged pipe, set the new piece in place and slide a coupling over each joint.
3
Tighten and test
3 Tighten the clamps on both couplings, then run water and check for leaks.
See it in action
A drill through a drain pipe, fixed with QwikFix.
Sizes
Each kit includes two couplings and a 12″ piece of Sch 40 PVC pipe.
| Part | Pipe size | Coupling O.D. | Pipe length |
|---|---|---|---|
| PQFIX-150-12 | 1-1/2″ | 2.38″ | 12″ |
| PQFIX-2-12 | 2″ | 2.88″ | 12″ |
| PQFIX-3-12 | 3″ | 4.13″ | 12″ |
| PQFIX-4-12 | 4″ | 5.06″ | 12″ |
Specifications
| Pipe | Plastic (Sch 40 PVC, ABS), cast iron or steel |
| Use | Drain, waste and vent (DWV) |
| Test pressure | Up to 4.3 psi |
| In the kit | Two Fernco 1056 Series flexible couplings and a 12″ piece of Sch 40 PVC pipe |
| Material | PVC couplings with stainless steel clamps |
| Install | Vertical or horizontal, with proper strapping or support |
| Tools | Screwdriver, nut driver or drill to tighten the clamps, plus a saw to cut out the damaged pipe |
| Made in | USA |
Common questions
Which size do I need?
Match the kit to the nominal size of your drain pipe: 1-1/2″, 2″, 3″ or 4″.
Will it work on cast iron or steel pipe?
Yes. The couplings fit plastic (Sch 40 PVC and ABS), cast iron and steel pipe of the same nominal size.
Can I use it on a water supply line?
No. QwikFix is for drain, waste and vent pipe only, with a test pressure up to 4.3 psi.
What if the damage is longer than 12″?
The kit replaces up to a 12″ section. For a longer repair, reach out and we’ll help you find the right couplings.
Got questions?
Not sure which size you need? Our team can help.