Menu
Under the sink, behind the washer
Flexible Connectors
Flexible connectors and repair parts for the drains in kitchens, bathrooms, laundry rooms and mechanical rooms. They line up with pipes that don’t, and none of them need glue.
Kitchen and bath
Laundry
HVAC condensate
Test and repair
Find it by room
Pick a room to see the connectors made for it.
Qwik Trap Connector
A flexible P-trap that lines up when the sink drain and wall pipe don’t.
1¼″ or 1½″
Drain and Trap Connectors
Connect a tubular trap to drain pipe, or join two pieces of tubular drain.
To 1½″ or 2″ pipe
Dishwasher Drain Connector
Connect the dishwasher hose to a disposal, a branch tailpiece or an air gap.
5/8″ and 7/8″ O.D.
Shower Drain Connectors
Seal a 2″ drain pipe into a shower drain body. No lead, oakum or glue.
2″ drain pipe
Fix-A-Flange
Repair a broken toilet flange without cutting it out.
Cast iron, plastic, copper or brass
Hose Grip Washer Connector
Keeps the washer hose in the standpipe so it can’t pop out and spill water on the floor.
1½″ or 2″ standpipe
Utility Connectors
Connect a copper or CPVC line to a 1½″ plastic fitting. Press fit, no tools.
½″, ¾″ or 1″ line
New
Condensate Trap
A flexible ¾″ P-trap for HVAC and air conditioner condensate lines. It clamps on with no primer or cement, and you can squeeze it to clear a clog.
¾″ pipe or hub
Pair it with Proflex
Past the trap, back to the drain
When the job runs back to an old cast iron or steel drain line, Proflex shielded couplings make the transition. A stainless steel shield keeps the joint rigid and aligned for above-ground DWV work.
¾″ to 8″
11 transition types
Cast iron, plastic, steel, copper and tubular
Why flexible
The seal of a Fernco, the access of a slip nut
Glue seals for good but has to be cut out. Slip nuts come apart but can drip. Fernco clamped connectors do both jobs.
Fernco clamped connector
Seals tight, comes apart
Made of flexible PVC with stainless steel clamps. It flexes to fit the pipe, makes a clamped seal, and loosens with a screwdriver when the drain needs work.
Service
Loosen the clamp and slide it off
Misalignment
Flexes to line up
Seal
Clamped seal
Install
Screwdriver or nut driver
Slip-joint tubular
Comes apart, but can drip
Service
Unscrew the nut
Misalignment
Very little
Seal
Washer has to seat square
Install
Hand-tighten, then check
Solvent weld
Seals for good, cut to service
Service
Cut it out and redo it
Misalignment
None
Seal
Permanent
Install
Primer, cement, cure time
Applies to clamped connectors. Utility Connectors press fit and Shower Drain Connectors drive in.
Where to next
Stock it, find it or ask us about it.
Distributors and retailers
Carry Fernco flexible connectors
Traps, drain and trap connectors, dishwasher, shower, laundry and condensate connectors, test caps and repair parts. Small parts that solve common jobs, from a supplier your customers already know.
- Parts for plumbers, contractors and homeowners
- Sell sheets, drawings and install instructions ready to share
- Fernco reps in the field to support your counter and your customers
Plumbers and homeowners
Buy it
Find Fernco connectors at plumbing supply houses and hardware stores near you.
Questions
Ask us
Not sure which connector fits? Our team can help, or a local rep can.