Menu
Storm Stop
Fast, water-activated flood protection without the sand, shoveling or mess.
Storm Stop Sandless Sandbags, 6 pack
Ready when water strikes. The bags ship dry and flat. Soak them in fresh water and in minutes each one expands into a 4″ tall barrier that helps absorb, contain and divert problem water.
About 28″ x 14″, 0.03″ thick
About 24″ x 12″ x 4″ tall
Barrier height per bag
Absorbed per bag, approx.
Dry weight per 6 pack
Shelf life stored dry
Keep Storm Stop stored dry. When water becomes a concern, activate the bags and set them in place.
1 Saturate each bag with fresh water from a hose, bucket or tub.
2 Give the bags about 10 minutes to fully expand.
3 Set the bags tight together. Over 3.5″ of water, stack them in a brick pattern.
4 Check the barrier now and then and reposition bags if needed.
Stacking: use a 1 to 3 ratio. For every 1 ft of height, make the base 3 ft wide, and build higher than the water you expect.
Watch Storm Stop activate, expand and stack into a barrier.
Indoors or out, at homes, businesses and municipal properties.
Divert water away from exterior doors, loading entrances and other openings.
Block stormwater, snowmelt or runoff from low-lying spaces.
Set around window wells and other below-grade openings where water collects.
Absorb, contain and redirect fresh-water leaks indoors.
Protect storage, equipment and property from surface water.
Build a temporary barrier where runoff collects or changes direction.
| Part | FS-6PACK Storm Stop Sandless Sandbags, 6 pack |
| Bags | 6 per pack, 1 ft x 2 ft each when activated |
| Activated height | 4″ |
| Absorbs | About 4 gallons of water per bag |
| Activation time | About 10 minutes |
| Dry weight | 3 lbs per 6 pack |
| Shelf life | 10+ years stored cool and dry |
| Use | Indoor or outdoor, single use, biodegradable active core |
| Made in | USA |
Setup, stacking and safety instructions, plus the dimensional drawing.
Questions about Storm Stop? Our team can help.